Description

Replacement high-pressure fuel injector for BMW S63TU engines. Includes sealing o-ring.
This is an EU6 injector, please verify your vehicle’s injector EU# before ordering.

Bosch 0261500262
BMW 13538627842

All new turbocharged BMW engines use a direct fuel injection system which directly injects fuel into the combustion chamber. This differs from a port injection system, which injects fuel into the intake side of the engine through the intake manifold. Direct injection fuel systems operate at significantly higher pressure than a conventional port injection fuel system. Due to the design, the engine really relies heavily on a properly operating fuel system. If your BMW is suffering from misfires or has a rough idle, it can be due to faulty fuel injectors.

Also replace decoupling element 13537577649 when installing new fuel injector.

Fitment Notes:
This EU6 injector applies to the following models equipped with the S63TU engine:

• BMW M5 (F10) – mid-2013 to 2016

• BMW M6 (F12/F13/F06) – mid-2013 to 2017

• BMW X5M / X6M (F85/F86) – mid-production onward (confirm EU6 via ISTA)

• BMW 750i / 750Li (F01/F02) – N63TU platform from mid-2013 onward

EU Injector Verification

Note: Per BMW service bulletin SI B13 03 15, the injectors in the vehicle may not match with what is listed in the BMW ETK. Identify the injector installed in the vehicle using ISTAD 4.04 or later test plan using the following path:

Service path:
Vehicle Management → Service Functions → Powertrain → Engine Electronics → Injector Determination

The test plan will state: “This engine requires EU# injectors.”

Important: This fuel injector is for vehicles with an EU6 designation and will not work on a vehicle with a different designation.
For EU5 applications, use Bosch 0261500136 – RK Autowerks S63 Bosch EU5 Fuel Injector.